Deformation and Density Change of Open-Cell Nickel Foam in Compression Test
-
- Kim Woo-Young
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Matsumoto Ryo
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
-
- Utsunomiya Hiroshi
- Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University
この論文をさがす
抄録
<p>Repeated compression test of open-cell type nickel foam (Celmet) was conducted to investigate deformation behavior with changes in density. Cylindrical billets with two pore sizes were compressed up to 90% in nominal strain. Apparent density, buoyant density and dimensions of billets were measured after each compression step. Compressive stress linearly increases without plateau region until the nominal strain of 0.4 with increase in apparent density and with slight increase in diameter. Apparent density and porosity estimated under assumption of no diameter change show good agreement with the experiments. Above the strain of 0.4, the stress as well as diameter apparently increases with remarkable increase in density.</p>
収録刊行物
-
- MATERIALS TRANSACTIONS
-
MATERIALS TRANSACTIONS 58 (10), 1373-1378, 2017
公益社団法人 日本金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204254379648
-
- NII論文ID
- 130006096671
-
- NII書誌ID
- AA1151294X
-
- ISSN
- 13475320
- 13459678
-
- NDL書誌ID
- 028534652
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可