Resistance to Hydrochloric Acid Solution of Fe-Cr-Mo-8P-2C Amorphous Coatings Sprayed by HVOF Process.
-
- OTSUBO Fumitaka
- Faculty of Engineering, Kyushu Institute of Technology
-
- ERA Hidenori
- Faculty of Engineering, Kyushu Institute of Technology
-
- KISHITAKE Katsuhiko
- Faculty of Engineering, Kyushu Institute of Technology
Bibliographic Information
- Other Title
-
- 高速フレーム溶射したFe‐Cr‐Mo‐8P‐2C合金非晶質溶射皮膜の耐塩酸性
- コウソク フレーム ヨウ サシタ Fe Cr Mo 8P 2C ゴウキン ヒショウシツ ヨウシャ ヒマク ノ タイエンサンセイ
Search this article
Abstract
Three kinds of Fe-8P-2C alloy powders containing 10 mass%Cr (10Cr), 20 mass%Cr (20Cr) and 10 mass%Cr-10 mass%Mo (10Mo), respectively, were thermally sprayed by a high velocity oxy-fuel (HVOF) process. The as-sprayed coatings of the 10Cr and 20Cr alloys are a mixture of an amorphous phase and a small quantity of crystalline phases, while as-sprayed coating of the 10Mo alloy is composed of only an amorphous phase. The anodic polarization curves of the coatings of the 10Cr and 20Cr alloys exhibited an activation-passivation transition in 1NHCl solution. On the other hand, the coating of the 10Mo allo, showed no active state and the lowest current density among the alloy coatings in the anodic polarization curve. The passive state of the coating of the 10Mo alloy was stable compared with the other coatings. The coating of the 10Mo alloy als, underwent no corrosion in 1NHCl solution at 0.5 and 1.0 V (vs. SCE), whereas Inconel 600 alloy plate was attacked remarkably.
Journal
-
- QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
-
QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY 19 (1), 54-59, 2001
JAPAN WELDING SOCIETY
- Tweet
Details
-
- CRID
- 1390001204724214400
-
- NII Article ID
- 130003764659
- 110003422060
-
- NII Book ID
- AN1005067X
-
- ISSN
- 24348252
- 02884771
- http://id.crossref.org/issn/02884771
-
- NDL BIB ID
- 5665726
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed