ゾル-ゲル法で作製した凹凸形状を有するSiO<sub>2</sub>薄膜の膜硬度に及ぼすTiO<sub>2</sub>添加効果と自動車用はっ水ガラスへの応用
書誌事項
- タイトル別名
-
- Effect of the Addition of TiO2 to SiO2 Films with Concave-Convex Surface Derived by the Sol-Gel Method on Film Hardness and Application to Water-Repellent Glasses for Automotive Windows.
この論文をさがす
説明
Silica-titania films with a concave-convex surface were prepared from a mixture of polymerized tetraethoxysilane (TEOS) sol containing tetraisopropoxytitanate and polymerized methyltriethoxysilane (MTES) sol in a molar ratio MTES/TEOS of 6. Film hardness was dependent on the composition of the coating sol, heat treatment temperature and time. The film obtained by introduction of 4mol% TiO2 to SiO2 and by heat treatment at 620°C for 10min was hard to be usable in engineering practice. New-type water-repellent glasses were produced y using these SiO2-TiO2 films as an under layer combined with fluoroalkylsilane; the glasses showed an abrasion resistance for practical application as automotive windows.
収録刊行物
-
- Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌)
-
Journal of the Ceramic Society of Japan (日本セラミックス協会学術論文誌) 108 (1256), 365-369, 2000
公益社団法人 日本セラミックス協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205247668992
-
- NII論文ID
- 110002290001
-
- NII書誌ID
- AN10040326
-
- ISSN
- 18821022
- 09145400
- http://id.crossref.org/issn/09145400
-
- NDL書誌ID
- 5333687
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可