2108 AuTi-18Co合金の超弾性挙動(S06-2 形状記憶合金の特性と応用技術(2),S06 形状記憶合金の特性と応用技術)

DOI Web Site

書誌事項

タイトル別名
  • 2108 Superelastic Behavior of AuTi-18Co Alloys
公開日
2007
DOI
  • 10.1299/jsmemecjo.2007.1.0_153
公開者
一般社団法人 日本機械学会

説明

In order to develop Ni-free biomedical superelastic alloys which can replace Ti-Ni, AuTi high temperature shape memory alloy is focused and its high martensitic transformation temperature is sufficiently decreased by 18mol%Co addition. In this paper, deformation behavior of Ti-32Au-18Co alloy with various aging treatments from 373K to 573K is investigated. Dynamic mechanical analysis (DMA) revealed that forward and reverse martensitic transformation temperatures are decreased below room temperature by aging treatment being higher than 373K. Cyclic loading-unloading tensile tests with constant strain increment of 1% revealed that, at room temperature (RT), (1) constant deformation stress appeared when martensitic transformation temperatures are above RT, and that (2) deformation stress is increased with increasing aging temperature when all the martensitic transformation temperatures are below RT. Therefore, the nonlinear shape recovery by unloading is caused by superelastic deformation. However, no superelastic deformation was recognized for Ti-31Au-19Co of which martensitic transformation temperatures are similar to those of Ti-32Au-18Co aged at 573K. These results suggest other condition(s) than martensitic transformation temperature must be required for the appearance of superelasticity.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ