書誌事項
- タイトル別名
-
- Estimate of Machine Settings in Hypoid Gear Cutting.
- ハイポイド ギヤ ノ ハギリ ショゲン ノ スイテイ
この論文をさがす
抄録
A method for estimating real machine settings in hypoid gear cutting is proposed. The coordinates of many points on the gear tooth surface are measured using a coordinate measuring machine, and a geometrical gear tooth surface which is strictly defined from the machine settings on a Gleason hypoid generator is estimated by the method of least squares so that the surface can fit the data of coordinate measurements. The real machine settings can be determined conversely from the estimated tooth surface. The measured hypoid gears are in practical use and the tooth bearing of the gears is acceptable. The path of contact is calculated using the estimated results and compared with the actual tooth bearing. The validity of the proposed method is confirmed by this comparison. The estimated real machine settings can be applied to the succeeding manufacturing, so that the trial-and-error process which is carried out by the skilled workers will fall into disuse.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 64 (627), 4388-4394, 1998
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206327169408
-
- NII論文ID
- 110002393662
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- HANDLE
- 10191/5838
-
- NDL書誌ID
- 4612481
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- IRDB
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可