書誌事項
- タイトル別名
-
- Duplex Spread-Blade Method for Cutting Spiral Bevel Gears Using a Quasi-Complementary Crown Gear.
- ジュン カソウ カンムリハグルマ オ モチイタ コウバイバ マガリバ カサハグ
この論文をさがす
抄録
In this study, an ordinary complementary crown gear generates both an actual spiral bevel gear and an imaginary spiral bevel gear whose pitch cone angle is 80o∼87o. The tooth surface of the imaginary bevel gear is replaced by a simple conical surface. The imaginary gear with the conical tooth surface is designated as a quasi-complementary crown gear and is used as a tool gear to generate the pinion. The quasi-complementary crown gear produces a tooth surface modification. As a result, the engagement of the gears is a point contact with a negligibly small non-conjugate. The complementary crown gear and the quasi-complementary crown gear each generate both sides of a tooth space of the work gear simultaneously because the cutter blades forming a tooth of each crown gear are widely spread by an adequate amount. The conditions which satisfy this duplex spread-blade method relating to both the complementary and quasi-complementary crown gears are shown in this PaPer.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 61 (589), 3709-3715, 1995
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206328983424
-
- NII論文ID
- 110002382095
-
- NII書誌ID
- AN00187463
-
- ISSN
- 18848354
- 03875024
-
- HANDLE
- 10191/5815
-
- NDL書誌ID
- 3625419
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- IRDB
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可