-
- Shimasaki Shin’ichi
- Department of Electro-Mechanical Systems Engineering, National Institute of Technology, Kagawa College
-
- Ueda Shigeru
- IMRAM, Tohoku University
-
- Saito Noritaka
- Department of Materials, Kyushu University
書誌事項
- タイトル別名
-
- Terminal Settling Velocity of Particle in Suspension
この論文をさがす
説明
<p>In the steelmaking process, most slags and fluxes often contain a solid phase, such as CaO. The suspension in which solid phases are suspended has higher viscosity than that of a pure matrix liquid. Therefore, it is expected that the viscosity of slag containing solid phases will increase. In this study, the terminal settling velocity of particles in a suspension has been measured. The suspensions consist of a silicone oil matrix and polyethylene beads, and the settling particles are bearing balls made of stainless steel. As a result of the higher viscosity of suspension, the terminal settling velocity of the bearing ball becomes slower than that in the pure silicone oil. It was clarified that the retardation of the terminal velocity and the increase in the drag coefficient depend only on the volume fraction of the solid phase (polyethylene beads) of the suspension, and they are independent of the size of the suspended beads and the viscosity of the matrix liquid. A correlation equation for predicting the drag coefficient of particles in a suspension was proposed.</p>
収録刊行物
-
- ISIJ International
-
ISIJ International 64 (15), 2186-2194, 2024-12-30
一般社団法人 日本鉄鋼協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390021218877905280
-
- ISSN
- 13475460
- 18832954
- 09151559
- 00211575
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- OpenAIRE
-
- 抄録ライセンスフラグ
- 使用不可