-
- 甲斐田 武延
- 電力中央研究所 グリッドイノベーション研究本部 九州大学大学院工学府 機械工学専攻
-
- マーティン ピール アンダーセン
- デンマーク工科大学 土木機械工学科
-
- 森 昌司
- 九州大学大学院工学研究院 機械工学部門
書誌事項
- タイトル別名
-
- Techno-economic analysis of a steam supply heat pump system (Potential for cost reduction through adoption of refrigerants with high critical temperatures and removal of a steam compressor)
説明
<p>High-temperature heat pumps represent a pivotal technology in the pursuit of decarbonizing industrial process heating with the utmost efficiency. Steam serves as the energy carrier for many industrial systems, making steam supply heat pumps as a promising approach for efficient decarbonization. An existing heat pump-based steam supply system with a supply steam temperature of 135°C or higher consists of the following 3 units; a heat pump unit with the mixture of R245fa and R134a, a flash tank unit, and a steam compressor unit. However, recent developments in refrigerants for higher applications have increased the technology options for the system configuration of steam supply heat pump. Specifically, it will be possible to supply steam at a level of 150°C, which could not be achieved with conventional refrigerants such as R245fa and R134a due to the critical temperature constraints. In this paper, a thermal and economic model for a steam supply heat pump system is developed based on the test results with the existing system. The model is applied to analyze the change in COP (coefficient of performance) and LCOH (levelized cost of heat) when changing to new refrigerants under the condition of 150°C steam supply. As a result, we clarify the couple of changing the refrigerant form the conventional R245fa to R1336mzz(Z) or R601 and removing the steam compressor can improve the COP and also reduce the LCOH.</p>
収録刊行物
-
- 日本機械学会論文集
-
日本機械学会論文集 91 (943), 25-00004-25-00004, 2025
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390022145089091584
-
- ISSN
- 21879761
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
-
- 抄録ライセンスフラグ
- 使用不可