吸熱型ガス変成炉の触媒とスス発生

DOI

書誌事項

タイトル別名
  • Study on Catalyst in Endthermic Gas Generator and Carbon Deposition

この論文をさがす

説明

It is badly needed to find out appropriate catalysts for the generation of endthermic gas for carburizing from commercial propane or butane gas, because, in Japan, our commercial propane and butane usually contain various amounts of unsaturated and heavy hydrocarbon; which deleriorate the catalytic action due to free carbon deposition on the catalysts.<br>Therefore, the author studied the function of various pure metallic oxides as the carrier of catalyst and could find that pure Cr2O3, CaO and Al2O3 were suitable for the purpose, but SiO2, MgO and Fe2O3 not. Further, it was recognized that the oxides impregnated with nickel up to about 5% by weight improved their catalytic action, and the catalytic effectiveness of the impregnated with cobalt was less than that of the impregnated with nickel. The oxides impregnated with cobalt, however, were not so effective as those with nickel.

収録刊行物

  • 金属表面技術

    金属表面技術 9 (11), 407-410, 1958

    一般社団法人 表面技術協会

詳細情報 詳細情報について

  • CRID
    1390282679090801792
  • NII論文ID
    130003810229
  • DOI
    10.4139/sfj1950.9.407
  • ISSN
    18843395
    00260614
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ