AW検定試験の試験体を用いた5MHz10×10A65と5MHz10×10A70の比較

DOI Web Site Web Site

書誌事項

タイトル別名
  • COMPARATIVE STUDY OF “5MHz10×10A65” PROBE AND “5MHz10×10A70” PROBE USED IN ULTRASONIC TESTING FOR AW SPECIMEN
  • AW ケンテイ シケン ノ シケンタイ オ モチイタ 5MHz10 × 10A65 ト 5MHz10 × 10A70 ノ ヒカク
  • COMPARATIVE STUDY OF “5MHz10×10A65” PROBE AND “5MHz10×10A70” PROBE USED IN ULTRASONIC TESTING FOR AW SPECIMEN

この論文をさがす

説明

According to the AIJ inspection standards of steel welding using ultrasonic testing, the standard angles of the probe are either 65 degrees or 70 degrees, but there are no official rules which probe should be used. In practical use, the 70 degrees probe is often used even though it is said that the 65 degrees probe is much superior in flaw detection.<br>We carried out an experiment to compare detection performance between “5MHz10×10A65” probe and “5MHz10×10A70” probe using AW specimen with internal flaw.<br>As a result, we found out that there were no distinct differences between the probes.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ