-
- MIWA Masafumi
- Institute of Technology and Science, The University of Tokushima
-
- MICHINOMOTO Takurou
- Department of Opto-Mechatronics, Faculty of Systems Engineering, Wakayama University
-
- TSUCHITANI Shigeki
- Department of Opto-Mechatronics, Faculty of Systems Engineering, Wakayama University
-
- YONEYAMA Satoru
- Department of Mechanical Engineering, Aoyama Gakuin University
書誌事項
- タイトル別名
-
- Inner Structure ⁄ Elastic Modulus Control of Micro Cantilever
この論文をさがす
抄録
It is important to know mechanical properties of micro structures fabricated as a micro machine component by micro-stereolithography (μSL). In the previous study, we reported that elastic modulus of a micro-cantilever fabricated by μSL is controllable by irradiation laser power and postcure processing time. In this study, micro-cantilevers are formed by changing lamination pitch (10 μm to 25 μm) and lamination orientation. Then, the relation between the load and the deflection of the cantilever is evaluated. Experimental results show that the elastic modulus of the cantilever decreases with the increase of the lamination pitch.
収録刊行物
-
- 実験力学
-
実験力学 8 (Special_Issue), s94-s97, 2008
日本実験力学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680166783360
-
- NII論文ID
- 10021156108
-
- NII書誌ID
- AA11822914
-
- ISSN
- 18844219
- 13464930
-
- NDL書誌ID
- 9568124
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可