衝撃疲労試験機の製作と衝撃荷重下でのステンレス鋼の疲労き裂成長速度挙動について

書誌事項

タイトル別名
  • On the fatigue crack propagation behavior under repeated impacts using a new type of impact fatigue testing machine.
  • ショウゲキ ヒロウ シケンキ ノ セイサク ト ショウゲキ カジュウカ デ ノ

この論文をさがす

抄録

Machines and structures often encounter repeated impacts in practice. So, it is very important to study fatigue fracture of steel under repeated impacts. Usually a rotating disk type impact fatigue testing machine is used for such study, but the analysis of the data obtained by using this machine is considerably difficult, because the impact phenomenon is transient and has complex characters. So, a new type of machine was made by modifying a rotating disk type impact fatigue testing machine, and fatigue tests under repeated impacts were carried out. Then, the influences of velocity of repeated impacts and stress ratio on the fatigue crack growth rate of stainless steel were investigated by means of fracture mechanics and fractography. The difference in crack growth rate between repeated impacts and more gradually-applied cyclic load was large. This difference was explained by the effective stress intensity factor based on the equivalent stress ratio which includes the repeated impact loading effect.

収録刊行物

  • 材料

    材料 33 (375), 1527-1532, 1984

    公益社団法人 日本材料学会

詳細情報

問題の指摘

ページトップへ