書誌事項
- タイトル別名
-
- Optical temperature measurement of small droplet array luminous flame in butane diffusion flame
- 公開日
- 2015
- 資源種別
- journal article
- DOI
-
- 10.1299/transjsme.14-00589
- 公開者
- 一般社団法人 日本機械学会
説明
Two color ratio method was applied to measure temperature distributions of a luminous diffusion flame. A small blue butane diffusion flame, 3mm in flame diameter, was used. A small droplets array (300 droplets of 30um in diameter) was injected in the diffusion flame. The component was 85% hexadecane and 15% o-xylene to surrogate diesel oil. A color CMOS high speed camera of 4kpfs in flame speed and 16um/pix in spatial resolution was used to measure the flame shape and the temperature. The flame with the droplet array was luminous and the temperature was measured with optical two color ratio method (green and red). In the two color ratio method, a threshold of the red intensity should be defined. As the flame could be assumed as an axial symmetry, an Abel conversion was used. In the Abel conversion, thresholds of red/green intensities should be defined to form a sextic even polynomial. A thin sheath thermocouple (0.3mm in sheath diameter) was used to compare the two color ratio method results. As a result, the red intensity threshold for the two color method was reasonable and 40 in this experiment. In comparison with a KL value two color method, the two color ratio method could show lower temperature region.
収録刊行物
-
- 日本機械学会論文集
-
日本機械学会論文集 81 (827), 14-00589-14-00589, 2015
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680491914880
-
- NII論文ID
- 130005089659
-
- ISSN
- 21879761
-
- 本文言語コード
- ja
-
- 資料種別
- journal article
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可
