書誌事項
- タイトル別名
-
- Influence of Particle Size on Anti-Adhesion Effect of Surface Polished Steel Plate
抄録
In this paper, we examined the influence of particle size on anti-adhesion effect of a surface polished steel plate. SiO2 spherical powders and stainless steel plates with seven kinds of surface roughness were used for the investigation. The adhesion tests of SiO2 powders to the polished stainless steel plates were performed using powders of nominal size 9 and 13μm. In the case of 13μm powder, the obvious adhesion and deposition of powder was not observed for all steel surface conditions. However, strong adhesion of particles and thin deposition layers were observed for 9μm powder, being independent of surface roughness of the steel plates. The size of adhered particles on the steel plate were measured by SEM observations in order to examine the adhesion mechanism of SiO2 particle to the polished stainless plate substrate. As a result, adhesion of 3-5 μm particles to the steel surface was largely independent of surface roughness. The adhesion of 3-5 μm particles can be avoided by mixing of small particles of 0.5μm powder into 9μm powder.
収録刊行物
-
- 日本機械学会論文集Ｃ編
-
日本機械学会論文集Ｃ編 77 (775), 1161-1170, 2011
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681363332608
-
- NII論文ID
- 130000873824
-
- ISSN
- 18848354
- 03875024
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可