書誌事項
- タイトル別名
-
- Analysis of Pin Grinding Mechanism in Twin Axes Synchronous Controlled Cranshaft Pin Grinder
この論文をさがす
説明
Twin axes synchronous controlled type CNC crankshaft pin grinder has been widely used, but grinding mechanism with this type of pin grinder is not cleared well. In this study, the grinding mechanism is analyzed, and it is found that the cylindrical plunge grinding process carries on. From the investigation of substantial surface speed of both the wheel and the workpiece, grinding speed ratio is formulated. Furthermore, a simulation method, which predicts the grinding results, is developed. In order to realize high precision pin grinding, two methods, which control workpiece rotation speed adequately, are proposed, such as the controlled grinding speed ratio method and the controlled residual stock method. From the analysis, it is made clear that stable grinding force and surface roughness are generated by the controlled grinding speed ratio method, and also high dimensional accracy will be realized by the controlled residual stock method.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 73 (732), 2350-2356, 2007
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681363424896
-
- NII論文ID
- 130004085000
-
- ISSN
- 18848354
- 03875024
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可