吹出し管を備えた吸込みノズルの空気輸送特性におよぼす吸込みノズル深さおよび吹出し管挿入長さの影響

書誌事項

タイトル別名
  • Effects of Insertion Length of Suction Nozzle and Injection Pipe on Pneumatic Conveying Characteristics of Suction Nozzle with Injection Pipe
  • フキダシ カン オ ソナエタ スイコミ ノズル ノ クウキ ユソウ トクセイ ニ オヨボス スイコミ ノズル フカサ オヨビ フキダシ カン ソウニュウ ナガサ ノ エイキョウ

この論文をさがす

抄録

<p>In the vacuum system of pneumatic conveying, the authors have proposed that a suction nozzle equipped with an injection pipe at the center would provide a highly dense, highly efficient method of transporting powder and particles. In this paper, we examined the effects of the insertion length of the suction nozzle and the injection pipe, by attaching the injection port on the outer part of the suction nozzle. The loading ratio for both cases (the injection ports positioned at the center and outer part) was not affected by the insertion length of the suction nozzle. However, the loading ratio incretion rate by the insertion length of the injection pipe was larger when the injection port was attached on the suction nozzle’s outer part. From the perspective of the nozzle efficiency analysis, it was concluded that the outer injection port can be used adequately during the high flow rate ratio range.</p>

収録刊行物

  • 粉体工学会誌

    粉体工学会誌 58 (6), 294-301, 2021-06-10

    一般社団法人 粉体工学会

参考文献 (7)*注記

もっと見る

詳細情報

問題の指摘

ページトップへ