Texture Formation through Thermomechanical Treatment and Its Effect on Superelasticity in Mg-Sc Shape Memory Alloy
-
- Yamagishi Keisuke
- Department of Materials Science, Graduate School of Engineering, Tohoku University
-
- Ando Daisuke
- Department of Materials Science, Graduate School of Engineering, Tohoku University
-
- Sutou Yuji
- Department of Materials Science, Graduate School of Engineering, Tohoku University
-
- Ogawa Yukiko
- Research Center for Structural Materials, National Institute for Materials Science
Bibliographic Information
- Other Title
-
- Mg-Sc形状記憶合金の加工熱処理による集合組織形成と超弾性特性に及ぼす影響
- Mg-Sc ケイジョウ キオク ゴウキン ノ カコウ ネツ ショリ ニ ヨル シュウゴウ ソシキ ケイセイ ト チョウダンセイ トクセイ ニ オヨボス エイキョウ
Search this article
Description
<p>The formation of texture through thermomechanical treatment was investigated in Mg-18.8 at% Sc shape memory alloy to enhance its superelasticity at room temperature. The samples were cold rolled in an α phase or in a β phase and then finally heat treated at 690℃ followed by water quenching to obtain a β phase. In the case of cold rolling in the α phase, a basal-plane texture was formed, while no preferential texture was observed along in-plane direction. After the final heat treatment, {011}<uvw>β transformation texture was obtained, according to Burgers relationship, indicating no improvement of the superelasticity along in-plane direction. In the case of the cold rolling in the β phase, a weak {111}<011>β recrystallization texture was obtained. The sample showed about 0.65% superelastic tensile strain along rolling direction, while that along transverse direction (//~<113>β) showed only about 0.43%. This trend is in good agreement with the orientation dependence on the transformation strain, but, the obtained superelastic strain was much lower than the expected value, which is due to the weak texture and suggests the existence of a strong grain constraint in the Mg-Sc shape memory alloy.</p>
Journal
-
- Journal of the Japan Institute of Metals and Materials
-
Journal of the Japan Institute of Metals and Materials 84 (8), 253-259, 2020-08-01
The Japan Institute of Metals and Materials
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390848250131204992
-
- NII Article ID
- 130007879819
-
- NII Book ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL BIB ID
- 030586722
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- Abstract License Flag
- Disallowed