Solid-State HCl Gas Sensor Using Na<sub>5</sub>DySi<sub>4</sub>O<sub>12</sub> and RuO<sub>2</sub> Electrode
-
- Hashimoto Yoshiyuki
- Department of Applied Chemistry, Kyushu Institute of Technology
-
- Kanou Masaho
- Department of Applied Chemistry, Kyushu Institute of Technology
-
- Takase Satoko
- Department of Applied Chemistry, Kyushu Institute of Technology
-
- Shimizu Youichi
- Department of Applied Chemistry, Kyushu Institute of Technology
抄録
<p>A potentiometric solid-state sensor using a Na5DySi4O12 solid-electrolyte and oxide electrodes was tried to examine for monitoring HCl gas. Among the oxides tested, the sensor using RuO2 electrode showed relatively good HCl response at 400°C. The electromotive force was almost linear to the logarithm of HCl concentration between 100 and 1000 ppm. This HCl sensor showed also good selectivity to CO2, NO, and NO2, and few effect of oxygen. A mixed potential sensing mechanism is tentatively proposed.</p>
収録刊行物
-
- 電気学会論文誌Ｅ（センサ・マイクロマシン部門誌）
-
電気学会論文誌Ｅ（センサ・マイクロマシン部門誌） 141 (11), 386-387, 2021-11-01
一般社団法人 電気学会
- Tweet
キーワード
詳細情報
-
- CRID
- 1390852870556025088
-
- NII論文ID
- 130008110067
-
- ISSN
- 13475525
- 13418939
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可