二相ステンレス鋼の海水熱交への使用とその問題

書誌事項

タイトル別名
  • Applications of Duplex Stainless Steel to the Seawater Heat Exchanger Tube

説明

High chromium austeno-ferritic duplex stainless steel NTK R-4 has been widely used as the heat exchanger tube in main steam condensers of ships and seawater heat exchangers of chemical plants for eight years. In this paper, relations between the corrosion failure rate FR on the heat exchangers using NTK R-4 tube and their designs, structures, maintenances and service conditions (seawater velocity, and temperature and pressure in a shell side) were investigated respectively.<br>Forms of the corrosion failures encountered in some heat exchangers were related to their service conditions. They have been caused through a hot spot corrosion and a crevice corrosion under the corrosion product. The adequate service conditions for NTK R-4 heat exchanger, a cooler and a condenser, were defined according to the value t(°C)×p(kg/cm2) in their shell side conditions. It was concluded that keeping the seawater velocity at least 1.5m/sec, a sterilization of sea-organisms by chlorine and excluding the trash entering into the heat exchanger were required for this tube.

収録刊行物

  • 防食技術

    防食技術 27 (6), 291-300, 1978

    社団法人 腐食防食協会

詳細情報 詳細情報について

  • CRID
    1574231878035611136
  • NII論文ID
    130007288938
  • データソース種別
    • CiNii Articles

問題の指摘

ページトップへ