Strength anisotropy of rolled 11Cr-ODS steel

IR

Bibliographic Information

Other Title
  • 圧延した11Cr-ODS鋼の強度異方性

Abstract

Materials for core components of fusion reactors and fast reactors, such as blankets and fuel cladding tubes, must be excellent in high temperature strength and irradiation resistance because they will be exposed to high heat flux and heavy neutron irradiation. Oxide dispersion strengthened (ODS) steels have been developing as the candidate material. Japan Atomic Energy Agency (JAEA) have been developing 9 and 11 Chromium (Cr) ODS steels for advanced fast reactor cladding tubes. The JAEA 11Cr-ODS steels were rolled in order to evaluate their anisotropy. Tensile tests and creep tests of them were carried out at 700 $^{\circ}$C in longitudinal and transverse orientation. The anisotropy of tensile strength was negligible, though that of creep strength was distinct. The observation results and chemical composition analysis suggested that the cause of the anisotropy in creep strength was prior powder boundary including Ti-rich precipitates.

Journal

Details 詳細情報について

Report a problem

Back to top