低変態温度溶接材料を用いた角回し溶接継手部の疲労寿命延伸効果に関する一考察

書誌事項

タイトル別名
  • A Study on Fatigue Life Improvement of Boxing Fillet Welded Joints using Low Transformation Temperature Welding Material

この論文をさがす

抄録

In our previous study, it was shown that the fatigue life of the boxing fillet welded joint was enhanced by about 10 times by applying the elongated bead welding with 40 mm bead length to the welded joint by using low transformation temperature (L.T.T.) welding material.  In this study, the followings were discussed, ① The estimation of the residual stress distribution of boxing fillet welded joint to which the elongated bead welding with L.T.T. welding material was applied, ② The work load and time of elongated bead welding on site welding, ③ The fatigue life enhancing effect of two elongated bead welding joints using different L.T.T. welding materials, L.T.T. 10Cr-10Ni filler metal (LTT1) and L.T.T. 6.5Mn filler metal (LTT2), ④ The fatigue life enhancing effect by using LTT2 with and without elongated bead applied to repair welding of boxing fillet welded joint with fatigue crack, ⑤ The fracture toughness of weld metal with LTT1 welding material, and so on.

収録刊行物

詳細情報 詳細情報について

  • CRID
    1050003824813884928
  • NII論文ID
    120006863107
  • NII書誌ID
    AA1274191X
  • ISSN
    24239976
  • Web Site
    https://nias.repo.nii.ac.jp/records/843
  • 本文言語コード
    ja
  • 資料種別
    departmental bulletin paper
  • データソース種別
    • IRDB
    • CiNii Articles

問題の指摘

ページトップへ