YAGレーザ接合した0.3%C TRIP鋼板のプレス成形性

機関リポジトリ Web Site

書誌事項

タイトル別名
  • Press Formability of YAG Laser Welded 0.3%C TRIP Steels
  • YAG レーザ セツゴウ シタ 0 3パーセント C TRIP コウハン ノ プレス セイケイセイ
  • Press Formability of YAG Laser Welded 0.3%C TRIP Steels

この論文をさがす

説明

In the present work, to improve the press formability of the combination of the 0.3%C transformation-induced plasticity (TRIP)-aided dual-phase steel (TDP steel) and 0.1%C TDP steel, the mechanical properties and press formability (stretch-formability and deep drawability) of YAG laser welded tailored blanks were investigated. An as-cold-rolled sheet steel with the chemical composition of (0.1-0.3)C-1.5Si-1.5Mn (mass%) was used in this study. For butt welding, the blank obtained after the heat treatment was cut using a fine cutter, and YAG laser processing equipment was used. The press formability was evaluated from the maximum stretch-height (H_<max>) and the limiting drawing ratio (LDR). Tensile tests and press forming tests have been conducted for laser butt welded joints obtained from the combination of the different steel. It is thought that this was assisted to TRIP of the TDP steel because the tensile strength of the 0.1%C TDP steel is consequentially lower than that of the 0.3%C TDP steel. High ductility and the high stretch-formability were able to be secured by the tailored blank.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ