セメント固化体からの易溶解性物質溶出モデルパラメータへの固化体作成条件の影響

書誌事項

タイトル別名
  • Influence of Solidified Waste Preparing Condition on Leaching Model Parameters of Easily Soluble Substances in Cement Solidified Waste

この論文をさがす

抄録

In order to clarify the relation between cement solidified waste preparing condition and leaching model parameters of easily soluble substances in cement solidified waste, four samples with different addition ratio of cement to fly ash were prepared in cylindrical form by shielding all their surface except top. Tank leaching test was conducted at L/S of 3.3. As the ratio of cement to fly ash increased, porosity of the sample increased from 32% to 46%. As porosity increased, effective diffusion coefficient, De, of Na, K and Cl increased. Furthermore, De/D0 (D0, molecular diffusion coefficient through water) of Na and K had the similar value, but De/D0 of Cl was smaller than these. Porosity of the sample had little effect on a rate constant of surface dissolution, k, and ratio of volume affecting surface dissolution, γ. A region of diffusion control decided from change of De with time and from incline of logti vs logJi didn’t accord with. This result suggested that it was difficult to decide an region of diffusion control by only incline of logti vs logJi.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ