書誌事項
- タイトル別名
-
- Creation and Application of Curves by Inverse Analysis and Spline Interpolation : Determination of Guide Frame Shape for Tunnel Inspection to Avoid Obstacles
- ギャクカイセキホウ ト スプライン ホカンホウ ニ ヨル フクザツ ナ キョクセン ノ ソウセイ ト オウヨウ(ショウガイブツ オ カイヒ スル トンネル ケンサヨウ ガイドフレーム ノ ケイジョウ ケッテイ シュホウ)
この論文をさがす
説明
老朽化したトンネルの内壁を自動で検査する方法を改善するため,トンネル内の障害物に応じて検査用ガイドフレームがフレキシブルに形状決定できる手法を開発した。ガイドフレームは可変形状トラスVGTで構成され,得られた障害物の位置情報に基づき,その形状を制御した。ガイドフレームの形状には,逆解析とスプライン補間法を利用し,障害物に応じたガイドフレームのポイントを指定してその形状を解析・決定した。このような解析および実験結果を基に,実用的なガイドフレームの形状決定ができ,トンネル検査を効率的に実施できる見込みを得た。 In order to improve the method of automatically inspecting the inner wall of an aging tunnel, we have developed a method that can flexibly determine the shape of the inspection guide frame according to obstacles in the tunnel. The guide frame was composed of VGT, and its shape was controlled based on the obtained position information of the obstacle. The shape of the guide frame was determined by using the inverse analysis of the shape and spline interpolation to specify the points of the guide frame corresponding to the obstacles and to analyze the shape. Based on such analysis and experimental results, the shape of a practical guide frame could be determined, and it was expected that tunnel inspection could be performed efficiently.
収録刊行物
-
- 湘南工科大学紀要
-
湘南工科大学紀要 54 (1), 9-15, 2020-03-31
湘南工科大学
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1050300058909554048
-
- NII論文ID
- 40022204399
-
- NII書誌ID
- AN10400308
-
- NDL書誌ID
- 030345300
-
- ISSN
- 09192549
-
- 本文言語コード
- ja
-
- 資料種別
- departmental bulletin paper
-
- データソース種別
-
- IRDB
- NDL
- CiNii Articles