極低温疲労試験における試験片の温度上昇と試験条件

IR IR (HANDLE) Open Access

Search this article

Description

Significant temperature rise occurs in specimen during mechanical tests at liquid helium temperature. We carried out measurements and an analysis of specimen temperature rise in order to get appropriate testing conditions during constant amplitude stress and strain cycling tests in liquid helium on typical austenitic stainless steels, titanium alloy and OFHC Cu. The magnitude of temperature rise increased with the increase of the test frequency and the strain range. The obtained testing conditions from specimen temperature measurements are as follows: i) In load-controlled fatigue tests, for tension-tension mode; less than 5Hz at a stress level of lower than yield strength and less than 1Hz at a stress level of higher than yield strength. For tension-compression mode; less than 1Hz at a stress level of lower than yield strength and less than 0.1Hz at a stress level of higher than yield strength, ii) In strain-controlled fatigue tests, less than 4×10^(-3)s^(-1) at a higher strain level.

Journal

  • 低温工学

    低温工学 26 (3), 190-196, 1991-06-25

    公益社団法人低温工学・超電導学会

Details 詳細情報について

Report a problem

Back to top