書誌事項
- タイトル別名
-
- タイキ プラズマ ヨウシャ シャネツ コーティング ノ キカイテキ トクセイ ニ オヨボス ヨウシャ ジョウケン ト コウオン バクロ ノ エイキョウ
- Influence of the spray process parameters and the thermal exposure on the mechanical properties of the free-standing air-plasma sprayed thermal barrier coating
この論文をさがす
抄録
type:論文(Article)
The tensile and the 4-point bending tests of the free-standing air plasma sprayed thermal barrier coating (APSed TBC) were carried out in order to evaluate the mechanical properties. The effects of the process variables in the APS and the isothermal exposure on the mechanical properties were investigated. The experimental results indicated that the mechanical properties of the TBC ceramic top coating were significantly changed by the process variables and the isothermal exposure. The elastic modulus evaluated from the unloading curve was much higher than that from the initial loading curve. The microstructural and analytical investigations were also carried out and the relationship between the mechanical properties and the splat structure was discussed. It was cleared that the mechanical properties of APSed TBC was controlled with the change of the splat structure by the initial stage of the sintering.
収録刊行物
-
- 溶射
-
溶射 44 (3), 88-95, 2007-07
日本溶射協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1050565162621027328
-
- NII論文ID
- 10018933241
-
- NII書誌ID
- AN10502250
-
- ISSN
- 09166076
-
- NDL書誌ID
- 8907691
-
- 本文言語コード
- ja
-
- 資料種別
- journal article
-
- データソース種別
-
- IRDB
- NDL
- CiNii Articles