Flexural waves in a periodic non-uniform Euler-Bernoulli beam: Analysis for arbitrary contour profiles and applications to wave control
-
- 琵琶, 志朗
- Department of Aeronautics and Astronautics, Graduate School of Engineering, Kyoto University･Department of Civil Engineering, Xi'an Jiaotong University
-
- Biwa, Shiro
- Department of Aeronautics and Astronautics, Graduate School of Engineering, Kyoto University
抄録
The flexural wave in a periodic non-uniform Euler-Bernoulli beam with arbitrarily contoured profiles is studied by utilizing the power series expansion method. The convergence criterion that makes the power series expansion method applicable is also illustrated. The validation is carried out by comparing the theoretical results with that from the finite element analysis when the beam thickness varies in different forms. For a quadratic thickness variation, the first band gap evolution versus the structural parameter is investigated, based on which a flexural-wave-based low-pass filter for frequency shunting and a rectangular lens for energy focusing are designed. It is revealed in the frequency domain analysis that the flexural wave with a lower frequency can propagate further when it travels into the wave filter. The lens designed exhibits a good focusing phenomenon with the focusing size smaller than one wavelength, and has a good performance at a certain finite frequency range. The theoretical method and design scheme can provide effective guidance for the flexural wave control.
収録刊行物
-
- International Journal of Mechanical Sciences
-
International Journal of Mechanical Sciences 188 2020-12-15
Elsevier BV
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1050566774891713536
-
- NII論文ID
- 120006877421
-
- ISSN
- 00207403
-
- HANDLE
- 2433/253723
-
- 本文言語コード
- en
-
- 資料種別
- journal article
-
- データソース種別
-
- IRDB
- CiNii Articles