板はり構造鋼試験片の 4 点曲げひずみ挙動におけるサイクル応答差の検討

機関リポジトリ HANDLE Web Site

書誌事項

タイトル別名
  • イタハリ コウゾウ コウ シケンヘン ノ 4テン マゲヒズミ キョドウ ニ オケル サイクル オウトウサ ノ ケントウ
  • Effect of Cyclic Load on Strain Behavior of Steel Beam Specimen under 4-point Bend

この論文をさがす

抄録

The fatigue test of surface crack propagation was conducted on the plate specimen with the small hole at a notch root in the low cycle fatigue region. The cyclic strain at a notch root was measured by strain gage and the cyclic strain behavior have been shown as the relationship between strain and number of cycles. The rate of surface fatigue crack propagation at a notch root were found from the crack length curve. It is found that the rate of surface fatigue crack propagation is expressed as the mth power of the range of strain intensity factor. Where the strain intensity factor is defined as the parameter multiplied the cyclic strain range at a notch root by root of the surface crack length. The m of mth power of the strain intensity factor range are different in the middle and in the edge of plate thickness. These experimental data and discussion have been presented.

長崎大学工学部研究報告 Vol.32(58) p.29-38, 2002

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ