Structural design of aeroelastic flapping wing

機関リポジトリ

この論文をさがす

説明

First International Symposium on Flutter and its Application (May 15-17, 2016. Mielparque-tokyo), Minato-ku, Tokyo, Japan

We have conducted aeroelastic analysis for the resonant type elastic flapping wing and investigated the effect of planform and thickness of the plate on the vibrational and aerodynamic characteristics. The resonant type elastic flapping wing consists of a CFRP rod and EPP plate. When a small oscillation is input to the wing base, bending and torsional wing deformation are produced passively due to aeroelastic phenomenon. To search an optimal design parameters of the wing to maximize thrust coefficient, parametric studies have been conducted with respect to the plate thickness, span location with the maximum chord, chord length at wing base, and chord length at wing tip. From these calculation, an optimal structure of the elastic wing have been obtained, which generates larger thrust coefficient than the initial value. When the resonant type elastic flapping wing have an optimal wing structure, both first and second mode have coupling mode shape of spanwise bending and torsion, and the first and second natural frequencies are close to each other. Such an optimal wing can produce an appropriate wing kinematics with the phase difference of near 90 deg by coupling the two vibrational modes. These results indicate that it is possible to conduct approximative optimal design only by using vibrational analysis without any aeroelastic analysis, which can save the calculation cost of numerical optimization.

形態: カラー図版あり

Physical characteristics: Original contains color illustrations

資料番号: AA1630046031

レポート番号: JAXA-SP-16-008E

収録刊行物

キーワード

詳細情報 詳細情報について

  • CRID
    1050574036210648832
  • NII論文ID
    120006827485
  • NII書誌ID
    AA11984031
  • ISSN
    1349113X
  • Web Site
    http://id.nii.ac.jp/1696/00003418/
  • 本文言語コード
    en
  • 資料種別
    conference paper
  • データソース種別
    • IRDB
    • CiNii Articles

問題の指摘

ページトップへ