書誌事項
- タイトル別名
-
- カセイ イドウ カガク タンサシャ ローバー ヨウ クッサクキ ノ カイハツ
- Development of a Drilling Machine on Mars Rover
この論文をさがす
抄録
An experimental study has been made on a drilling machine on board Mars rover for scientific exploration of Mars with a special emphasis on fabricating a model and testing. The major objective of Mars exploration is set to search for water and organic material in underground of Mars. An engineering model of a drilling machine to be on board and used for the sample collection in an extensive scientific exploration of Mars surface and undeground has been fabricated. As a drilling machine, [auger boring] has been adopted. Though it cannot drill hard rocks, it is simple and easy to operate, because it does not require any liquid for lubrication and cooling. No particular effort has been done yet to reduce the weight and size. It has a capablity of 1.5 meter boring, requiring 1.15kW electric power. The auger bit is surrounded with a metal cylindrical casing and the collected soil is stored in the space between the auger bit and the casing. A drilling test was performed using a simulated Mars soil. It has a layered structure, and between each layer, a thin sheet having different color is inserted. The simulated soil has been drilled and collected preserving the layer structure. It has been verified that the sample can be collected with a vertical resolution of about 20 cm.
資料番号: SA0166373000
収録刊行物
-
- 宇宙科学研究所報告
-
宇宙科学研究所報告 79 1-23, 1993-12
宇宙科学研究所
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1050848249891788160
-
- NII論文ID
- 110000222531
-
- NII書誌ID
- AN00354474
-
- ISSN
- 02852853
-
- NDL書誌ID
- 3860423
-
- 本文言語コード
- ja
-
- 資料種別
- departmental bulletin paper
-
- データソース種別
-
- IRDB
- NDL
- CiNii Articles