Study on Precision Positioning using a Diaphragm Chuck with Three Jaws

IR Web Site

Bibliographic Information

Other Title
  • 三本爪ダイヤフラムチャックを用いた精密位置決めに関する研究
  • 3ボン ツメ ダイヤフラムチャック オ モチイタ セイミツ イチギメ ニ カンスル ケンキュウ

Search this article

Abstract

application/pdf

The purpose of this study is to automatically position a workpiece model at an arbitrary point with high precision. For precision positioning with a gripped workpiece model，the diaphragm chuck has a piezoelectric element in each of the three jaws. Despite the disadvantages of narrow-range movement and hysteresis，the piezoelectric element is popular for use in fine adjustment because of the advantages of compactness，high resolution，good responsiveness，and control at an applied voltage. The workpiece model position was measured using a CCD camera. The CCD camera allowed quick position measurement. A voltage was applied to the piezoelectric elements to excite them as actuators for the automatic precision positioning of a workpiece model gripped by the diaphragm chuck with three jaws. Displacement to the target position was set to 7μm for positioning. Consequently，precision positioning with an error of within 0.39μm was realized in any direction.

Journal

Keywords

Details 詳細情報について

Report a problem

Back to top