Excellent strength–ductility balance of Sc-Zr-modified Al–Mg alloy by tuning bimodal microstructure via hatch spacing in laser powder bed fusion
抄録
Ekubaru Y., Gokcekaya O., Ishimoto T., et al. Excellent strength–ductility balance of Sc-Zr-modified Al–Mg alloy by tuning bimodal microstructure via hatch spacing in laser powder bed fusion. Materials and Design, 221, 110976. https://doi.org/10.1016/j.matdes.2022.110976.
The bimodal microstructure, which comprises ultrafine grains (UFGs) forming along the melt pool boundary and relatively coarse grains inside the melt pool, is a characteristic of the Sc-Zr-modified Al–Mg-based alloy (Scalmalloy) microstructure manufactured using laser powder bed fusion (LPBF). Focusing on this microstructural feature, we investigated the improvement in the mechanical properties of LPBF-fabricated Scalmalloy by tailoring the volume fraction of UFGs. Our approach was to decrease the laser hatch spacing (d) from 0.1 to 0.04 mm, while the volume fraction of UFGs increased from 34.6 ± 0.6 % (d = 0.1 mm) to 59.5 ± 0.5 % (d = 0.06 mm). The tensile yield stress increased from 296 ± 9 (d = 0.1 mm) to 380 ± 6 MPa (d = 0.06 mm), while maintaining a large elongation (14.8 % ± 1.2 %). The yield stress and elongation were superior to those of the cast counterparts by 2.9 and 4.0 times, respectively. In the sample with d = 0.04 mm, pores formed owing to excessive thermal energy input. Additionally, we investigated multiple strengthening mechanisms of the as-fabricated alloy. This is the first study to improve the mechanical properties of LPBF-fabricated Scalmalloy by optimizing the track-to-track interval and tuning the UFG fraction.
収録刊行物
-
- Materials and Design
-
Materials and Design 221 110976-, 2022-09-01
Elsevier
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1050862643876698240
-
- ISSN
- 18734197
- 02641275
-
- HANDLE
- 11094/89747
-
- 本文言語コード
- en
-
- 資料種別
- journal article
-
- データソース種別
-
- IRDB
- Crossref
- KAKEN