Direct joining of carbon-fiber–reinforced plastic to an aluminum alloy using friction lap joining
書誌事項
- 公開日
- 2015-05
- 資源種別
- journal article
- 権利情報
-
- https://www.elsevier.com/tdm/userlicense/1.0/
- DOI
-
- 10.1016/j.compositesb.2014.12.029
- 公開者
- Elsevier BV
この論文をさがす
説明
Abstract A carbon-fiber–reinforced thermoplastic (polyamide 6 with 20 wt.% carbon fiber addition) and an aluminum alloy (A5052) were joined using friction lap joining. The joint characteristics were evaluated to investigate the effects of A5052 surface treatments and the joining speed on the joint properties. Carbon-fiber–reinforced thermoplastic and A5052 were joined via an interfacial magnesium oxide layer. Surface grinding of the A5052 generated the aluminum hydroxide on the alloy surface and increased the tensile shear strength of the joint. The tensile shear strength increased as the joining speed increased from 100 to 1600 mm min − 1 , and decreased thereafter.
収録刊行物
-
- Composites Part B: Engineering
-
Composites Part B: Engineering 73 82-88, 2015-05
Elsevier BV
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1360002215874993024
-
- ISSN
- 13598368
-
- 資料種別
- journal article
-
- データソース種別
-
- Crossref
- KAKEN
- OpenAIRE
