Electric potential changes associated with nucleation of stick-slip of simulated gouges

書誌事項

公開日
2011-04
資源種別
journal article
権利情報
  • https://www.elsevier.com/tdm/userlicense/1.0/
  • https://www.elsevier.com/legal/tdmrep-license
  • https://doi.org/10.15223/policy-017
  • https://doi.org/10.15223/policy-037
  • https://doi.org/10.15223/policy-012
  • https://doi.org/10.15223/policy-029
  • https://doi.org/10.15223/policy-004
DOI
  • 10.1016/j.tecto.2011.01.018
公開者
Elsevier BV

この論文をさがす

説明

Our friction experiments using simulated gouges detected premonitory changes in electric potential before stick-slip events. These precursor electric signals have been detected both in piezoelectric quartz and non-piezoelectric gabbroic gouges. The changes in the potential were locally detected by electrodes set very close to the fault surface associated with slow slip prior to stick-slip events. The magnitude of electrification is proportional to fault slip associated with gradual stress releases, indicating that the electrification is slip-dependent process. From the detailed microstructural analyses on a representative sample, Riedel (R1) shears known to be formed during stable sliding were the most densely developed around the electrode pair which detected the precursory voltage changes. This indicates that local increases in the voltages were likely caused by frictional electrification due to slow slip on R1 shears in nucleation phases of stick-slip events. Our experimental results imply that natural faults with thicker gouge zones would require greater precursory slips, resulting in larger electric signals in the nucleation phase of earthquakes.

収録刊行物

  • Tectonophysics

    Tectonophysics 502 (3-4), 308-314, 2011-04

    Elsevier BV

被引用文献 (6)*注記

もっと見る

参考文献 (33)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ