Influence of Reconsolidation Techniques and Strain Rate on the Stiffness of Undisturbed Clays from Triaxial Tests
-
- DCF Lo Presti
- Politecnico di Torino 1 Associate professor , Department of Structural and Geotechnical Engineering, , Corso Duca degli Abruzzi 24, 10129Torino, Italy .
-
- O Pallara
- Politecnico di Torino 2 Technician , Department of Structural and Geotechnical Engineering, , Corso Duca degli Abruzzi 24, 10129Torino, Italy .
-
- A Cavallaro
- University of Catania 3 Post-graduate student , , viale Andrea Doria 6, 95125Catania, Italy .
-
- M Jamiolkowski
- Politecnico di Torino 4 Professor , Department of Structural and Geotechnical Engineering, , Corso Duca degli Abruzzi 24, 10129Torino, Italy .
説明
<jats:title>Abstract</jats:title><jats:p>This paper concerns the stiffness assessment of undisturbed clays from triaxial tests. The paper summarizes the research activity undertaken at the authors' universities over the last five years by means of triaxial cells equipped with local gages for axial and radial strain measurements and with piezoceramic bender elements for the measurement of the propagation velocity of differently polarized shear waves. The main purpose of this research was to define reliable test procedures in order to determine the stiffness of geomaterials to be used for settlement analysis under working load conditions. In particular the paper deals with four different topics: (1) evaluation of sample disturbance by means of different methods, (2) assessment of the reconsolidation techniques that minimize the sample disturbance effects, (3) influence of strain rate on the stiffness of undisturbed clays, (4) stiffness anisotropy of undisturbed clays at small strains.</jats:p>
収録刊行物
-
- Geotechnical Testing Journal
-
Geotechnical Testing Journal 22 (3), 211-225, 1999-09-01
ASTM International