Effects of processing parameters in thermally induced phase separation technique on porous architecture of scaffolds for bone tissue engineering
-
- Rosa Akbarzadeh
- Department of Chemical Paper and Biomedical Engineering Miami University Oxford Ohio 45056
-
- Azizeh‐Mitra Yousefi
- Department of Chemical Paper and Biomedical Engineering Miami University Oxford Ohio 45056
説明
<jats:title>Abstract</jats:title><jats:p>Tissue engineering makes use of 3D scaffolds to sustain three‐dimensional growth of cells and guide new tissue formation. To meet the multiple requirements for regeneration of biological tissues and organs, a wide range of scaffold fabrication techniques have been developed, aiming to produce porous constructs with the desired pore size range and pore morphology. Among different scaffold fabrication techniques, thermally induced phase separation (TIPS) method has been widely used in recent years because of its potential to produce highly porous scaffolds with interconnected pore morphology. The scaffold architecture can be closely controlled by adjusting the process parameters, including polymer type and concentration, solvent composition, quenching temperature and time, coarsening process, and incorporation of inorganic particles. The objective of this review is to provide information pertaining to the effect of these parameters on the architecture and properties of the scaffolds fabricated by the TIPS technique. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 102B: 1304–1315, 2014.</jats:p>
収録刊行物
-
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
-
Journal of Biomedical Materials Research Part B: Applied Biomaterials 102 (6), 1304-1315, 2014-01-15
Wiley
