Microstructure evolution induced by solidification and ferrite–austenite massive-like transformation in Fe–C alloys
抄録
<jats:title>Abstract</jats:title> <jats:p>The coarsening of austenite grains produced through a massive-like transformation from the ferrite to the austenite phase during/after solidification in Fe–0.45mass%C steel was examined through time-resolved X-ray diffraction measurements using time-resolved computed tomography. The δ phase solidification resulted in a single δ grain in the observation region (0.6 mm in diameter, 0.1 mm in height). The massive-like transformation produced multiple γ grains, and coarsening immediately followed the transformation. The coarsening in the observation region was completed even within 200 s. A correlation of crystallographic orientation between the γ grains was found in the γ grain structure. The massive-like transformation frequently produced fcc (111) twinned grains, and the twinned austenite grains tended to remain during coarsening because the twin interface energy is lower than the grain boundary energy. The massive-like transformation following the solidification contributed to the texture formation in the γ grain structure.</jats:p>
収録刊行物
-
- IOP Conference Series: Materials Science and Engineering
-
IOP Conference Series: Materials Science and Engineering 1274 (1), 012055-, 2023-01-01
IOP Publishing
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1360017282447213312
-
- ISSN
- 1757899X
- 17578981
-
- データソース種別
-
- Crossref
- KAKEN