Influence of Porosity on Friction and Wear of Tetragonal Zirconia Polycrystal

書誌事項

公開日
1997-02
権利情報
  • http://onlinelibrary.wiley.com/termsAndConditions#vor
DOI
  • 10.1111/j.1151-2916.1997.tb02841.x
公開者
Wiley

この論文をさがす

説明

<jats:p> Sliding wear properties of ultra‐fine‐grained (180 nm) yttria‐doped tetragonal zirconia (Y‐TZP) ceramics were examined with porosities from 1.5% to 7%. On a pin‐on‐plate tribometer under dry‐N <jats:sub>2</jats:sub> conditions, e.g., wear rates of the material increase by a factor of 5 by increasing porosity with a factor of 5 (from 1.5 to 7.0 vol%). In all cases no (irreversible) phase transformation to monoclinic zirconia took place during wear tests. The results for the relatively dense nanostructured materials showed significant evidence of plastic deformation and less microcrack formation. The morphology of the wear tracks in these ceramics indicate that the degree and amount of microcracks on the contact surface increased with porosity. A change in wear mechanism is observed. </jats:p>

収録刊行物

被引用文献 (1)*注記

もっと見る

問題の指摘

ページトップへ