Hydrogen permeation in anisotropic Nb–TiNi two-phase alloys formed by forging and rolling

DOI Web Site Web Site 参考文献37件

この論文をさがす

説明

Abstract The formation of an anisotropic microstructure by forging and rolling of a Nb–TiNi two-phase alloy and the effects of direction and annealing on hydrogen permeability were investigated. After forging and rolling, the granular (Nb, Ti) phase was strongly elongated along the rolling direction (RD) and compressed along the normal direction (ND). Hydrogen permeability along the RD (ND) increased (decreased) dramatically. The hydrogen permeability of this anisotropic microstructure can be explained by the law of mixtures using the hydrogen permeabilities of (Nb, Ti) and TiNi single-phase alloys. The hydrogen permeabilities along RD and ND correspond to parallel- and series-type hydrogen permeability, respectively. The 94-μm-thick RD sample shows a large hydrogen flux of 0.57 mol H2 m−2 s−1 (77 ccH2 cm−2 min−1) without hydrogen embrittlement. Phase boundary between (Nb, Ti) and TiNi phases, aligned parallel to the hydrogen flux, is one of the hydrogen permeation path.

収録刊行物

参考文献 (37)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ