Systematic measurements of heat transfer characteristics in saturated pool boiling of water-based nanofluids

DOI Web Site Web Site 26 References

Description

Abstract Experiments were carried out to investigate the heat transfer characteristics in saturated pool boiling of water-based nanofluids. An upward-facing copper surface of 20 mm in diameter was used as the heated surface. Main experimental parameters in this work were nanoparticles’ material (TiO 2 , Al 2 O 3 and SiO 2 ), mass concentration (0.04, 0.4 and 1 kg/m 3 ) and dispersion condition (fine and coarse dispersions). Effects of these parameters on the time-variation of wall superheat under constant heat flux, the heat transfer coefficient (boiling curve) and the critical heat flux (CHF) were explored. It was found that the particle dispersion condition has no noticeable influence on the heat transfer characteristics within the range tested in this work. Whilst, the material and concentration of nanoparticles greatly affected the time-variation of wall superheat and the boiling curve. In particular, it was found that the wall superheat likely to increase significantly when the nanoparticle layer formed on the heated surface is partially detached. The CHF in nanofluid was 2.5–3 times higher than that for pure water in all the experimental conditions.

Journal

References(26)*help

See more

Related Projects

See more

Report a problem

Back to top