Effects of Anisotropic Slip on the Elastohydrodynamic Lubrication of Circular Contacts
-
- Qie-Da Chen
- Department of Materials Science and Engineering, National Cheng Kung University, No. 1 University Road, Tainan 701, Taiwan e-mail:
-
- Hsiang-Chin Jao
- Department of Materials Science and Engineering, National Cheng Kung University, No. 1 University Road, Tainan 701, Taiwan e-mail:
-
- Li-Ming Chu
- Department of Mechanical Engineering, Southern Taiwan University of Science and Technology, No. 1 Nantai Street, Tainan 710, Taiwan e-mail:
-
- Wang-Long Li
- Department of Materials Science and Engineering, National Cheng Kung University, No. 1 University Road, Tainan 701, Taiwan e-mail:
説明
<jats:p>By coupling the equations of the modified Reynolds equation with the anisotropic slip effect, the piezoviscosity and piezodensity relations, the elasticity deformation equation, and the load equilibrium equation are solved simultaneously using the finite element method (FEM) for the elastohydrodynamic lubrication (EHL) of circular contact problems under constant load conditions. Results show that the film thickness is more sensitive to the slip length in a sliding direction (x-direction) than to the slip length in a transverse direction (y-direction). A slip in the y-direction concentrates the pressure toward the center region, and the film collects toward the central region and possesses a deeper dimple. The central pressure and coefficient of friction (COF) increase as the slip length in the y-direction increases. On the contrary, the central pressure and COF decrease as the slip length in the x-direction increases. Detailed results and animations for film thicknesses and pressure distributions are available under the “Supplemental Data” tab for this paper on the ASME Digital Collection.</jats:p>
収録刊行物
-
- Journal of Tribology
-
Journal of Tribology 138 (3), 1-, 2016-02-15
ASME International
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1360857597893497856
-
- ISSN
- 15288897
- 07424787
-
- データソース種別
-
- Crossref