Recovery of Platinum Group Metals from Leach Solutions of Spent Catalytic Converters Using Custom-Made Resins

抄録

<jats:p>Platinum group metals (PGMs) play a key role in modern society as they find application in clean technologies and other high-tech equipment. Spent catalytic converters as a secondary resource contain higher PGM concentrations and the recovery of these metals via leaching is continuously being improved but efforts are also directed at the purification of individual metal ions. The study presents the recovery of PGMs, namely, rhodium (Rh), platinum (Pt) and palladium (Pd) as well as base metals, namely, zinc (Zn), nickel (Ni), iron (Fe), manganese (Mn) and chromium (Cr) using leachates from spent diesel and petrol catalytic converters. The largest amount of Pt was leached from the diesel catalytic converter while the petrol gave the highest amount of Pd when leached with aqua regia. Merrifield beads (M) were functionalized with triethylenetetramine (TETA), ethane-1,2-dithiol (SS) and bis((1H-benzimidazol-2-yl)methyl)sulfide (NSN) to form M-TETA, M-SS and M-NSN, respectively, for recovery of PGMs and base metals from the leach solutions. The adsorption and loading capacities of the PGMs and base metals were investigated using column studies at 1 M HCl concentration. The loading capacity was observed in the increasing order of Pd to be 64.93 mmol/g (M-SS), 177.07 mmol/g (M-NSN), and 192.0 mmol/g (M-TETA), respectively, from a petrol catalytic converter. The M-NSN beads also had a much higher loading capacity for Fe (489.55 mmol/g) compared to other base metals. The finding showed that functionalized Merrifield resins were effective for the simultaneous recovery of PGMs and base metals from spent catalytic converters.</jats:p>

収録刊行物

  • Minerals

    Minerals 12 (3), 361-, 2022-03-16

    MDPI AG

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ