A multiinput type converter for an uninterruptible dc power supply

DOI Web Site Web Site 参考文献1件

書誌事項

公開日
1986-01
権利情報
  • http://onlinelibrary.wiley.com/termsAndConditions#vor
DOI
  • 10.1002/ecjb.4420690608
公開者
Wiley

この論文をさがす

説明

<jats:title>Abstract</jats:title><jats:p>Low‐power uninterruptible dc power supplies have been used widely. These are powered by several types of power sources with differing voltages, e.g., commercial ac power sources as well as batteries. A multi‐input‐type converter is developed to simplify circuit configuration and realize a low‐loss power system.</jats:p><jats:p>This paper presents a method of designing a multiinput transformer as well as the operation principle of a multiinput‐type uninterruptible power supply and the circuit technology required for it. The power supply can be realized if the transformer primary winding‐turn ratio is designed considering the input voltage variation range and the voltage‐drop in the transformer primary circuit. The fact that the switching‐duty ratio must be changed drastically and that the switching transistor loss is inclined to increase in a multiinput‐type converter causes some problems. It is shown that the application of a collector current proportional drive circuit to the forward‐type converter or a base resistor switching circuit to the flyback‐type converter is effective in reducing the converter loss and the converter can be simplified by using most of the converter circuits in common.</jats:p>

収録刊行物

参考文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ