-
- Jan Schroers
- Keck Laboratory of Engineering Materials, California Institute of Technology, Pasadena, California 91125
-
- William L. Johnson
- Keck Laboratory of Engineering Materials, California Institute of Technology, Pasadena, California 91125
説明
<jats:p>Highly processable bulk metallic glass alloys in the Pt–Co–Ni–Cu–P system were discovered. The alloys show low liquidus temperature below 900 K, excellent processability with low critical cooling rate reflecting in maximum casting thicknesses in quartz tubes of up to 20 mm, and a large supercooled liquid region. The Pt57.5Cu14.7Ni5.3P22.5 composition has a liquidus temperature of 795 K, a glass transition temperature of 508 K with a supercooled liquid region of 98 K. For medical and jewelry applications a Ni-free alloy, Pt60Cu16Co2P22 was discovered with a liquidus temperature of 881 K, a glass transition temperature of 506 K, and a supercooled liquid region of 63 K. Glass formation was observed in a wider composition range. Vickers hardness of these alloys is in the 400 Hv range. The alloys can be processed in the supercooled liquid region in air without any measurable oxidation. In this region, a large processing window is available in which the material does not embrittle. Embrittlement in these alloys is correlated with crystallization. It can be avoided as long as substantial crystallization does not take place during isothermal processing in the supercooled liquid region. Also, liquid processing can be performed in air when flux with B2O3.</jats:p>
収録刊行物
-
- Applied Physics Letters
-
Applied Physics Letters 84 (18), 3666-3668, 2004-05-03
AIP Publishing