この論文をさがす
説明
Abstract This paper deals with bending and springback phenomena of a stainless-steel clad aluminum sheet in V-shaped air bending. The aim of this study is to investigate the bending characteristics such as sheet thickness change and the bending angles of the sheet before/after springback. The first part of this paper is on the experimental observations. V-bending experiments were performed for both the cases of Al in /SS out (i.e., aluminum layer is located inside the bent clad) and SS in /Al out (i.e., stainless-steel layer is located inside the bent clad). From these results, it was found that the sheet-set condition (either Al in /SS out or SS in /Al out ) has a great influence on the bending phenomena. In the second part, the accurate prediction of springback by FE analysis, especially the role of elasto-plasticity models, is discussed. When using Yoshida–Uemori kinematic hardening model (F. Yoshida, T. Uemori, Int. J. Plasticity 18, 2002; Int. J. Mech. Sci., 45, 2003), which well describes the Bauschinger effect of materials, the springback of the clad sheet is accurately calculated, whereas the classical isotropic hardening model underestimates the springback.
収録刊行物
-
- Journal of Materials Processing Technology
-
Journal of Materials Processing Technology 210 (2), 272-278, 2010-01
Elsevier BV