-
- F. Wang
- Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1
-
- J. G. Lenard
- Department of Mechanical Engineering, University of Waterloo, Waterloo, Ontario, Canada N2L 3G1
この論文をさがす
説明
<jats:p>Ring compression tests were conducted at constant true strain rates in the temperature range of 900–975°C. The constant friction shear factor, m, was determined using a calibration chart. Scaling was permitted during the experiments in which a glass based lubricant was also used. Frictional conditions were affected most by the rate of strain; increasing it led to lower values of m.</jats:p>
収録刊行物
-
- Journal of Engineering Materials and Technology
-
Journal of Engineering Materials and Technology 114 (1), 13-18, 1992-01-01
ASME International
