High efficient surface finishing of bio-titanium alloy by large-area electron beam irradiation

DOI Web Site Web Site 被引用文献8件

書誌事項

公開日
2004-06
権利情報
  • https://www.elsevier.com/tdm/userlicense/1.0/
DOI
  • 10.1016/j.jmatprotec.2004.02.017
公開者
Elsevier BV

この論文をさがす

説明

Abstract A new surface finishing process for bio-titanium alloy products by large-area electron beam (LAEB) irradiation is proposed. In the LAEB irradiation equipment, high energy density EB can be irradiated without concentrating the beam. Therefore, LAEB with a maximum diameter of 60 mm can be used for instantaneous melting or evaporating metal surface. Experimental results made it clear that the surface roughness becomes smaller with increasing energy density of beam. Under a proper irradiating condition, the surface roughness of titanium alloy machined with end mill decreases from 10 to 0.8 μm R z in a few minutes. Moreover, the corrosion resistance can be greatly improved.

収録刊行物

被引用文献 (8)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ