Bistable Behavior of the Cylindrical Origami Structure With Kresling Pattern

DOI PDF 被引用文献3件
  • Cai Jianguo
    Mem. ASME Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University, Si Pai Lou No. 2, Nanjing 210096, China e-mail:
  • Deng Xiaowei
    Department of Structural Engineering, University of California, San Diego, CA 92093 e-mail:
  • Zhou Ya
    Wuxi Architectural Design & Research Institute Co. Ltd, Wuxi, Jiangsu 214001, China e-mail:
  • Feng Jian
    Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University, Si Pai Lou No. 2, Nanjing 210096, China e-mail:
  • Tu Yongming
    Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, Luleå SE-971 87, Sweden e-mail:

この論文をさがす

説明

<jats:p>The deployment of a cylinder based on origami with Kresling pattern, whose basic mechanisms are formed by the buckling of a thin cylindrical shell under torsional loading, is studied in this paper. The model consists of identical triangular panels with cyclic symmetry and has a small displacement internal inextensional mechanism. First, geometric formulation of the design problem is presented. Then, assuming that the deployment and folding process is uniform, the bistable behavior of the cylinder is discussed. It can be found that, during the deployment, the dimensionless strain energy increases first and then reduces to zero but followed by another sharp increase. Moreover, the limit condition of geometry parameters for the bistable phenomenon is also discussed. Finally, the bistable behavior is also studied by using numerical simulations for simple and more complex case of the cylinder with multistory. The numerical results agree well with the analytical predictions. Therefore, comparisons with finite element predictions have shown that the analytical solutions given in this paper are accurate and have validated the assumptions made in the derivations.</jats:p>

収録刊行物

被引用文献 (3)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ