Amorphous Metal Oxide Blocking Layers for Highly Efficient Low-Temperature Brookite TiO<sub>2</sub>-Based Perovskite Solar Cells

DOI Web Site 被引用文献10件
  • Atsushi Kogo
    National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8565, Japan
  • Yoshitaka Sanehira
    Graduate School of Engineering, Toin University of Yokohama, 1614 Kurogane-cho, Aoba, Yokohama, Kanagawa 225-8503, Japan
  • Youhei Numata
    Graduate School of Engineering, Toin University of Yokohama, 1614 Kurogane-cho, Aoba, Yokohama, Kanagawa 225-8503, Japan
  • Masashi Ikegami
    Graduate School of Engineering, Toin University of Yokohama, 1614 Kurogane-cho, Aoba, Yokohama, Kanagawa 225-8503, Japan
  • Tsutomu Miyasaka
    Graduate School of Engineering, Toin University of Yokohama, 1614 Kurogane-cho, Aoba, Yokohama, Kanagawa 225-8503, Japan

説明

A fully low-temperature-processed perovskite solar cell was fabricated with an ultrathin amorphous TiOx hole-blocking layer in combination with brookite TiO2 prepared at temperature <150 °C. Structured with TiOx/brookite TiO2 bilayer electron collector, the perovskite solar cells exhibit high efficiency up to 21.6% being supported by high open-circuit voltage and fill factor up to 1.18 V and 0.83, respectively. Compared to SnOx hole-blocking layer, TiOx has better electron band alignment with brookite TiO2 and hence, results in higher efficiency.

収録刊行物

被引用文献 (10)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ