Flow Boiling in Horizontal Tubes: Part 1—Development of a Diabatic Two-Phase Flow Pattern Map

DOI PDF 被引用文献6件
  • N. Kattan
    Laboratory for Industrial Energy Systems, Department of Mechanical Engineering, Swiss Federal Institute of Technology, CH-1015 Lausanne, Switzerland
  • J. R. Thome
    Laboratory for Industrial Energy Systems, Department of Mechanical Engineering, Swiss Federal Institute of Technology, CH-1015 Lausanne, Switzerland
  • D. Favrat
    Laboratory for Industrial Energy Systems, Department of Mechanical Engineering, Swiss Federal Institute of Technology, CH-1015 Lausanne, Switzerland

書誌事項

公開日
1998-02-01
DOI
  • 10.1115/1.2830037
公開者
ASME International

この論文をさがす

説明

<jats:p>An improved two-phase flow pattern map is proposed for evaporation in horizontal tubes. The new map was developed based on flow pattern data for five different refrigerants covering a wide range of mass velocities and vapor qualities. The new map is valid for both adiabatic and diabatic (evaporating) flows and accurately identifies about 96 percent of the 702 data points. In addition, the new flow pattern map includes the prediction of the onset of dryout at the top of the tube during evaporation inside horizontal tubes as a function of heat flux and flow parameters.</jats:p>

収録刊行物

被引用文献 (6)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ